Tag Archives: L.E.D. lighting

Light It Up, Your Path That Is

At some point in our riding career, we will replace the headlights on our motorcycles and scratch our heads as to which ones to install. Do we stick with the OEM replacement unit? Do we upgrade to a Plasma or HID light? We even have to consider an LED replacement these days. At K and G Cycles our goal is to provide you the best value for your hard earned dollar and sometimes that means searching all over the place to do so. Well, in our travels we have found an affordable priced LED headlight replacement bulb for your Honda Gold Wing GL1500.

BBP-10-105 LED Replacement Bulb    If you want the brilliance and clarity of LED lighting but the price of it scares you away, we have the solution. Part # BBP-10-105 is a condenser style constant current LED bulb that is a direct replacement for the standard H4 bulb found on GL1500s (1988-1997) Headlights. This bulb features 16 high capacity 5 watt LEDs circling this new H4 replacement as well as a condenser lens to greatly enhance the brightness. This is truly an exceptional 80 watt LED bulb. Designed to fit GL1500 Gold Wings 1988-97, this will work as a replacement for any other H4 application. With a price tag under $60 this should be an easy decision.

BBP-10-104_1_LED Replacement Bulb     Now if we the replaced the center light and left the outer ones alone, we wouldn’t be doing much good. Have no fear, we have LED replacements for the outer lights too. A condenser lens constant current LED bulb (Part # BBP-10-104) replaces the standard GE # 192-T 3 ¼ wedge base 5 watt position light bulb as used on the GL1500 Gold Wing front lighting system. This custom designed LED bulb has (5) 5 watt condenser lensed LED’s that come together to give you a whopping 25 watts, all in an LED bulb measuring only 32mm (1¼”) long. This condenser lens LED fits directly into the OEM outer light position sockets on all years of the GL1500 Gold Wing (1988-2000). Since they are sold as a single unit, 2 are required for the GL1500. These bulbs also fit as replacements for most other uses of T 3 ¼ wedge bulbs. For less than $25 each, you can increase your visual footprint dramatically and still stay within your budget.

   Updating your lighting shouldn’t have to cost you an arm and a leg. With LED bulb replacements from K and G Cycles you can get the job done for around $100. Increasing your safety by installing cleaner, brighter lights has never been closer than it is right now. Shop on over and get ready yo see a whole new light when it comes to your motorcycle.

Better Lighting for A Better Ride

At some point in our riding career, we will replace the headlights on our motorcycles and scratch our heads as to which ones to install. Do we stick with the OEM replacement unit? Do we upgrade to a Plasma or HID light? We even have to consider an LED replacement these days. At K and G Cycles our goal is to provide you the best value for your hard earned dollar and sometimes that means searching all over the place to do so. Well, in our travels we have found an affordable priced LED headlight replacement bulb for your Honda Gold Wing GL1500.

BBP-10-105 LED Replacement Bulb    If you want the brilliance and clarity of LED lighting but the price of it scares you away, we have the solution. Part # BBP-10-105 is a condenser style constant current LED bulb that is a direct replacement for the standard H4 bulb found on GL1500s (1988-1997) Headlights. This bulb features 16 high capacity 5 watt LEDs circling this new H4 replacement as well as a condenser lens to greatly enhance the brightness. This is truly an exceptional 80 watt LED bulb. Designed to fit GL1500 Gold Wings 1988-97, this will work as a replacement for any other H4 application. With a price tag under $60 this should be an easy decision.

BBP-10-104_1_LED Replacement Bulb     Now if we the replaced the center light and left the outer ones alone, we wouldn’t be doing much good. Have no fear, we have LED replacements for the outer lights too. A condenser lens constant current LED bulb (Part # BBP-10-104) replaces the standard GE # 192-T 3 ¼ wedge base 5 watt position light bulb as used on the GL1500 Gold Wing front lighting system. This custom designed LED bulb has (5) 5 watt condenser lensed LED’s that come together to give you a whopping 25 watts, all in an LED bulb measuring only 32mm (1¼”) long. This condenser lens LED fits directly into the OEM outer light position sockets on all years of the GL1500 Gold Wing (1988-2000). Since they are sold as a single unit, 2 are required for the GL1500. These bulbs also fit as replacements for most other uses of T 3 ¼ wedge bulbs. For less than $25 each, you can increase your visual footprint dramatically and still stay within your budget.

   Updating your lighting shouldn’t have to cost you an arm and a leg. With LED bulb replacements from K and G Cycles you can get the job done for around $100. Increasing your safety by installing cleaner, brighter lights has never been closer than it is right now. Shop on over and get ready yo see a whole new light when it comes to your motorcycle.

Turn on The Night!

At some point in our riding career, we will replace the headlights on our motorcycles and scratch our heads as to which ones to install. Do we stick with the OEM replacement unit? Do we upgrade to a Plasma or HID light? We even have to consider an LED replacement these days. At K and G Cycles our goal is to provide you the best value for your hard earned dollar and sometimes that means searching all over the place to do so. Well, in our travels we have found an affordable priced LED headlight replacement bulb for your Honda Gold Wing GL1500.

BBP-10-105 LED Replacement Bulb    If you want the brilliance and clarity of LED lighting but the price of it scares you away, we have the solution. Part # BBP-10-105 is a condenser style constant current LED bulb that is a direct replacement for the standard H4 bulb found on GL1500s (1988-1997) Headlights. This bulb features 16 high capacity 5 watt LEDs circling this new H4 replacement as well as a condenser lens to greatly enhance the brightness. This is truly an exceptional 80 watt LED bulb. Designed to fit GL1500 Gold Wings 1988-97, this will work as a replacement for any other H4 application. With a price tag under $60 this should be an easy decision.

BBP-10-104_1_LED Replacement Bulb     Now if we the replaced the center light and left the outer ones alone, we wouldn’t be doing much good. Have no fear, we have LED replacements for the outer lights too. A condenser lens constant current LED bulb (Part # BBP-10-104) replaces the standard GE # 192-T 3 ¼ wedge base 5 watt position light bulb as used on the GL1500 Gold Wing front lighting system. This custom designed LED bulb has (5) 5 watt condenser lensed LED’s that come together to give you a whopping 25 watts, all in an LED bulb measuring only 32mm (1¼”) long. This condenser lens LED fits directly into the OEM outer light position sockets on all years of the GL1500 Gold Wing (1988-2000). Since they are sold as a single unit, 2 are required for the GL1500. These bulbs also fit as replacements for most other uses of T 3 ¼ wedge bulbs. For less than $25 each, you can increase your visual footprint dramatically and still stay within your budget.

   Updating your lighting shouldn’t have to cost you an arm and a leg. With LED bulb replacements from K and G Cycles you can get the job done for around $100. Increasing your safety by installing cleaner, brighter lights has never been closer than it is right now. Shop on over and get ready yo see a whole new light when it comes to your motorcycle.

Shedding New Light on Your Ride

At some point in our riding career, we will replace the headlights on our motorcycles and scratch our heads as to which ones to install. Do we stick with the OEM replacement unit? Do we upgrade to a Plasma or HID light? We even have to consider an LED replacement these days. At K and G Cycles our goal is to provide you the best value for your hard earned dollar and sometimes that means searching all over the place to do so. Well, in our travels we have found an affordable priced LED headlight replacement bulb for your Honda Gold Wing GL1500.

BBP-10-105 LED Replacement Bulb    If you want the brilliance and clarity of LED lighting but the price of it scares you away, we have the solution. Part # BBP-10-105 is a condenser style constant current LED bulb that is a direct replacement for the standard H4 bulb found on GL1500s (1988-1997) Headlights. This bulb features 16 high capacity 5 watt LEDs circling this new H4 replacement as well as a condenser lens to greatly enhance the brightness. This is truly an exceptional 80 watt LED bulb. Designed to fit GL1500 Gold Wings 1988-97, this will work as a replacement for many other H4 applications. With a price tag under $60 this should be an easy decision.

BBP-10-104_1_LED Replacement Bulb     Now if we the replaced the center light and left the outer ones alone, we wouldn’t be doing much good. Have no fear, we have LED replacements for the outer lights too. A condenser lens constant current LED bulb (Part # BBP-10-104) replaces the standard GE # 192-T 3 ¼ wedge base 5 watt position light bulb as used on the GL1500 Gold Wing front lighting system. This custom designed LED bulb has (5) 5 watt condenser lensed LED’s that come together to give you a whopping 25 watts, all in an LED bulb measuring only 32mm (1¼”) long. This condenser lens LED fits directly into the OEM outer light position sockets on all years of the GL1500 Gold Wing (1988-2000). Since they are sold as a single unit, 2 are required for the GL1500. These bulbs also fit as replacements for most other uses of T 3 ¼ wedge bulbs. For less than $25 each, you can increase your visual footprint dramatically and still stay within your budget.

   Updating your lighting shouldn’t have to cost you an arm and a leg. With LED bulb replacements from K and G Cycles you can get the job done for around $100. Increasing your safety by installing cleaner, brighter lights has never been closer than it is right now. Shop on over and get ready yo see a whole new light when it comes to your motorcycle.

Future’s So Bright Thanks To LED’s

At some point in our riding career, we will replace the headlights on our motorcycles and scratch our heads as to which ones to install. Do we stick with the OEM replacement unit? Do we upgrade to a Plasma or HID light? We even have to consider an LED replacement these days. At K and G Cycles our goal is to provide you the best value for your hard earned dollar and sometimes that means searching all over the place to do so. Well, in our travels we have found an affordable priced LED headlight replacement bulb for your Honda Gold Wing GL1500.

BBP-10-105 LED Replacement Bulb    If you want the brilliance and clarity of LED lighting but the price of it scares you away, we have the solution. Part # BBP-10-105 is a condenser style constant current LED bulb that is a direct replacement for the standard H4 bulb found on GL1500s (1988-1997) Headlights. This bulb features 16 high capacity 5 watt LEDs circling this new H4 replacement as well as a condenser lens to greatly enhance the brightness. This is truly an exceptional 80 watt LED bulb. Designed to fit GL1500 Gold Wings 1988-97, this will work as a replacement for any other H4 application. With a price tag under $60 this should be an easy decision.

BBP-10-104_1_LED Replacement Bulb     Now if we the replaced the center light and left the outer ones alone, we wouldn’t be doing much good. Have no fear, we have LED replacements for the outer lights too. A condenser lens constant current LED bulb (Part # BBP-10-104) replaces the standard GE # 192-T 3 ¼ wedge base 5 watt position light bulb as used on the GL1500 Gold Wing front lighting system. This custom designed LED bulb has (5) 5 watt condenser lensed LED’s that come together to give you a whopping 25 watts, all in an LED bulb measuring only 32mm (1¼”) long. This condenser lens LED fits directly into the OEM outer light position sockets on all years of the GL1500 Gold Wing (1988-2000). Since they are sold as a single unit, 2 are required for the GL1500. These bulbs also fit as replacements for most other uses of T 3 ¼ wedge bulbs. For less than $25 each, you can increase your visual footprint dramatically and still stay within your budget.

   Updating your lighting shouldn’t have to cost you an arm and a leg. With LED bulb replacements from K and G Cycles you can get the job done for around $100. Increasing your safety by installing cleaner, brighter lights has never been closer than it is right now. Shop on over and get ready yo see a whole new light when it comes to your motorcycle.

Bright, Efficient Lighting for Less

At some point in our riding career, we will replace the headlights on our motorcycles and scratch our heads as to which ones to install. Do we stick with the OEM replacement unit? Do we upgrade to a Plasma or HID light? We even have to consider an LED replacement these days. At K and G Cycles our goal is to provide you the best value for your hard earned dollar and sometimes that means searching all over the place to do so. Well, in our travels we have found an affordable priced LED headlight replacement bulb for your Honda Gold Wing GL1500.

BBP-10-105 LED Replacement Bulb    If you want the brilliance and clarity of LED lighting but the price of it scares you away, we have the solution. Part # BBP-10-105 is a condenser style constant current LED bulb that is a direct replacement for the standard H4 bulb found on GL1500s (1988-1997) Headlights. This bulb features 16 high capacity 5 watt LEDs circling this new H4 replacement as well as a condenser lens to greatly enhance the brightness. This is truly an exceptional 80 watt LED bulb. Designed to fit GL1500 Gold Wings 1988-97, this will work as a replacement for any other H4 application. With a price tag under $60 this should be an easy decision.

BBP-10-104_1_LED Replacement Bulb     Now if we the replaced the center light and left the outer ones alone, we wouldn’t be doing much good. Have no fear, we have LED replacements for the outer lights too. A condenser lens constant current LED bulb (Part # BBP-10-104) replaces the standard GE # 192-T 3 ¼ wedge base 5 watt position light bulb as used on the GL1500 Gold Wing front lighting system. This custom designed LED bulb has (5) 5 watt condenser lensed LED’s that come together to give you a whopping 25 watts, all in an LED bulb measuring only 32mm (1¼”) long. This condenser lens LED fits directly into the OEM outer light position sockets on all years of the GL1500 Gold Wing (1988-2000). Since they are sold as a single unit, 2 are required for the GL1500. These bulbs also fit as replacements for most other uses of T 3 ¼ wedge bulbs. For less than $25 each, you can increase your visual footprint dramatically and still stay within your budget.

   Updating your lighting shouldn’t have to cost you an arm and a leg. With LED bulb replacements from K and G Cycles you can get the job done for around $100. Increasing your safety by installing cleaner, brighter lights has never been closer than it is right now. Shop on over and get ready yo see a whole new light when it comes to your motorcycle.

Installing L.E.D. Lights offer increased Visibility, Safety, and Fun

   Adding auxiliary lighting to your motorcycle can benefit you in many ways. The addition of L.E.D. lights can increase safety by allowing you to be seen more and they can also highlight and turn it into a rolling light show. Whatever your motive, K and G Cycles (www.kandgcycles.com) has a great selection of auxiliary L.E.D. lights for your bike. Here are just a few.

   Part # BBP-52-786 – L.E.D. Trunk Lights by Martini (shown in the picture below) . Keeping with high quality offerings, these tough Chromed ABS Plastic lights are drop in fitment designed to keep the headaches to a minimum. Clear lenses let the red L.E.D.’s shine through even during daylight hours.

GW Trunk Lights BBP-52-788   You can continue your rear light upgrade with Part # BBP-52-788 – L.E.D. Saddlebag lights. The clear lens/red light fixtures provide brighter light and last longer than conventional set-ups providing the best value for your money. These Saddlebag lights plug directly into your OEM plugs and are designed to bolt directly into the stock locations. For the to fully function, an additional load equalizer ( Part #BBP-13-304a) must be purchased and installed.

BBP-52-816 LED Saddlebag Scuff Accents   Finally this pair of chrome LED Saddlebag Scuff Accents (Part # BBP-52-816) add even more style to your Wing. They cover the black OEM side saddlebag panels and increase safety and visibility by using SMD LEDs. These accents incorporate 56 high visibility LEDs, 28 per side, to let you be seen better in all conditions. The design of this LED Saddlebag Scuff Accent flows into the available  pair of Battery Side Covers (52-822) that has its own matching rubber scuff pads and forward flowing design.

   We want you to be safe and have fun with your Gold Wing. That is why K and G Cycles (www.kandgcycles.com) has plenty of upgrades for your Gold Wing at unbelievable prices. Increase your visibility, increase your safety, and increase your personal light show with L.E.D. Lights from K and G Cycles.

How to start a Gold Wing Light Show – Use Martini Lights

   A huge part of owning a bike is customizing it. Honda Gold Wing Owners understand this and many of them like to install custom lighting on their bikes. When you add a ton of lighting to the stock charging system it can become over taxed so L.E.D. lighting is a perfect way to go. K and G Cycles (www.kandgcycles.com) is your source for custom lighting for your GL so you can become the beacon in the night.

  • BBP-LED-Martini-Lights   1) Leading the charge is Part # BBP-52-791, the L.E.D. Trunk Light Set. This chrome plated LED Martini Lighted Trunk molding insert easily installs into existing mounting points and the Plug ‘N Go wiring makes connection effortless. The 80 Red LED’s work continuously to enhance safety and provide full dual function running and brake lights. You can also add full turn signal functionality easily by using Part # BBP-52-766 Trunk Turn Signal Conversion Harness.
  •    2) Like all the other lighting pieces by Martini, Part # BBP-52-792 is constructed of lightweight ABS plastic and chrome dipped for a beautiful finish. Straight forward installation means you have desired results with a little bit of effort. Because the 70 Red L.E.D.’s are always on, they offer more safety during the day and increased lighting at night which should translate into others seeing you easier.
  •    3) Part # BBP-52-769, the Lower Air Dam lights by Martini. This pair of Lower Air Dam Lights replace the OEM lower accents with bright chrome and 30 brilliant Red LED’s to enhance safety. The Martini design inserts are contoured perfectly to fit the Honda GL1800’s saddlebags for a sleek custom look.  Installation is made easy with our a plug and play wiring and the included hardware. Only 2 more parts and the rear end conversion will be complete.
  •    4) Part # BBP-52-786 L.E.D. Trunk Lights by Martini. Keeping with high quality offerings, these tough Chromed ABS Plastic lights are drop in fitment designed to keep the headaches to a minimum. Clear lenses let the red L.E.D.’s shine through even during daylight hours.
  •  5) Finally you can cap your rear upgrade with Part # BBP-52-788  L.E.D. Saddlebag lights. The clear lens/red light fixtures provide brighter light and last longer than conventional set-ups providing the best value for your money. These Saddlebag lights plug directly into your OEM plugs and are designed to bolt directly into the stock locations. For the to fully function, an additional load equalizer ( Part #BBP-13-304a) must be purchased and installed.

   We are now going to switch gears and bring some bright work to the front of your Wing. Still installing Martini Lights, we begin bringing the front end to life.

  • frt-gold-wing-martinis    6)  Part # BBP-52-738 is Martini’s Air Intake Grilles. These grilles incorporate six amber LED’s on each side, to give a beautiful chrome, lighted accent to the front of the Honda GL1800. Adding safety through visibility has always been the focus for Martini Lights and these are no different. Having the capacity to function as running and turn signal lights is what makes Martini’s Lighted Air Intake Grilles unique. Form, function, and fun is what you get when you install these lights. Best of all, they come with everything you need for a trouble free installation.
  •    7) Part # BBP-52-770 reveals the Chrome Fairing Accents. Martini’s Engineers have hit it out of the park with these. Utilizing a whopping 43 Amber L.E.D. lights per side, the fairing accent trim will shine through even the darkest night. As with most of the auxiliary lighting accessories from Martini, these too can be wired to serve as running lights as well as turn signals. We have also found the rich layer of chrome on these fairing accent pieces reflects the lighting for an even brighter display of light.
  •    8) Part # BBP-52-728 (2001-05) and BBP-52-753 (2006-10) are Opera Lights for your cylinder heads. Easy installation is a part of Martini’s allure and these Opera Lights don’t disappoint. Simple peel and stick double sided tape is what attaches them to your bike. Another great feature is they merely plug into a harness that already exists (so no unsightly splicing is required). Let us not forget the standard feature of dual purpose lighting as the Opera Lights can be used as added turn signals and running lights.

(Not Shown) Part #  BBP-52-737 – Is the last of the newest in Martini’s growing catalog of auxiliary accent lighting pieces. Clad in chrome so deep you can see yesterday, this front fender accent piece has 8 brilliant Amber L.E.D. lights that adorn each side of the fender tip. Though mounting the piece is a breeze, if you want to employ the lights, you will need to drill through the fender.

This is just a small sampling of Martini’s collection of Chrome wrapped L.E.D. Accent/Auxiliary lighting available from K and G Cycles (www.kandgcycles.com). Many of the accent lights from Martini serve 2 purposes – Running Lights and Turn Signals. Log on today to see the whole collection of Martini’s Lights and start building your rolling light show.

L.E.D. Bulbs for your Motorcycle at a Fraction of the Cost

   At some point in our riding career, we will replace the headlights on our motorcycles and scratch our heads as to which ones to install. Do we stick with the OEM replacement unit? Do we upgrade to a Plasma or HID light? We even have to consider an LED replacement these days. At K and G Cycles (www.kandgcycles.com) our goal is to provide you the best value for your hard earned dollar and sometimes that means searching all over the place to do so. Well, in our travels we have found an affordable priced LED headlight replacement bulb for your Honda Gold Wing GL1500.

BBP-10-105 LED Replacement Bulb    If you want the brilliance and clarity of LED lighting but the price of it scares you away, we have the solution. Part # BBP-10-105 is a condenser style constant current LED bulb that is a direct replacement for the standard H4 bulb found on GL1500s (1988-1997) Headlights. This bulb features 16 high capacity 5 watt LEDs circling this new H4 replacement as well as a condenser lens to greatly enhance the brightness. This is truly an exceptional 80 watt LED bulb. Designed to fit GL1500 Gold Wings 1988-97, this will work as a replacement for any other H4 application. With a price tag under $60 this should be an easy decision.

BBP-10-104_1_LED Replacement Bulb     Now if we the replaced the center light and left the outer ones alone, we wouldn’t be doing much good. Have no fear, we have LED replacements for the outer lights too. A condenser lens constant current LED bulb (Part # BBP-10-104) replaces the standard GE # 192-T 3 ¼ wedge base 5 watt position light bulb as used on the GL1500 Gold Wing front lighting system. This custom designed LED bulb has (5) 5 watt condenser lensed LED’s that come together to give you a whopping 25 watts, all in an LED bulb measuring only 32mm (1¼”) long. This condenser lens LED fits directly into the OEM outer light position sockets on all years of the GL1500 Gold Wing (1988-2000). Since they are sold as a single unit, 2 are required for the GL1500. These bulbs also fit as replacements for most other uses of T 3 ¼ wedge bulbs. For less than $25 each, you can increase your visual footprint dramatically and still stay within your budget.

   Updating your lighting shouldn’t have to cost you an arm and a leg. With LED bulb replacements from K and G Cycles (www.kandgcycles.com) you can get the job done for around $100. Increasing your safety by installing cleaner, brighter lights has never been closer than it is right now. Shop on over and get ready yo see a whole new light when it comes to your motorcycle.

Adding Martini’s to your Gold Wing won’t get you in trouble.

Staring at the empty box of Martini’s sitting in front of me, I could only utter one thing, “You complete me!” That is the look of the Gold Wing we just finished installing the latest round of Martini Lights on. We all know part of owning a Wing is adding auxiliary lighting that not only enables us to be seen more, but also ends up putting a smile on many of people was pass in our travels. K and G Cycles (www.kandgcycles.com) proudly offers you the new products in Martini’s Line up, allowing you to complete the look on the front and rear of your ride.

BBP-Martini-Lts-3  You will see in the picture on the left, 3 of the 4 auxiliary lights we installed on the GW. In the picture we numbered them so you can see the corresponding part number and placement on the motorcycle.

1)  Part # BBP-52-738 is Martini’s Air Intake Grilles. These grilles incorporate six amber LED’s on each side, to give a beautiful chrome, lighted accent to the front of the Honda GL1800. Adding safety through visibility has always been the focus for Martini Lights and these are no different. Having the capacity to function as running and turn signal lights is what makes Martini’s Lighted Air Intake Grilles unique. Form, function, and fun is what you get when you install these lights. Best of all, they come with everything you need for a trouble free installation.

2) Part # BBP-52-770 reveals the Chrome Fairing Accents. Martini’s Engineers have hit it out of the park with these. Utilizing a whopping 43 Amber L.E.D. lights per side, the fairing accent trim will shine through even the darkest night. As with most of the auxiliary lighting accessories from Martini, these too can be wired to serve as running lights as well as turn signals. We have also found the rich layer of chrome on these fairing accent pieces reflects the lighting for an even brighter display of light.

 

3) Part # BBP-52-728 (2001-05) and BBP-52-753 (2006-10) are Opera Lights for your cylinder heads. Easy installation is a part of Martini’s allure and these Opera Lights don’t disappoint. Simple peel and stick double sided tape is what attaches them to your bike. Another great feature is they merely plug into a harness that already exists (so no unsightly splicing is required). Let us not forget the standard feature of dual purpose lighting as the Opera Lights can be used as added turn signals and running lights.

(Not Shown) Part #  BBP-52-737 – Is the last of the newest in Martini’s growing catalog of auxiliary accent lighting pieces. Clad in chrome so deep you can see yesterday, this front fender accent piece has 8 brilliant Amber L.E.D. lights that adorn each side of the fender tip. Though mounting the piece is a breeze, if you want to employ the lights, you will need to drill through the fender.

This is just a small sampling of Martini’s collection of Chrome wrapped L.E.D. Accent/Auxiliary lighting available from K and G Cycles (www.kandgcycles.com). Many of the accent lights from Martini serve 2 purposes – Running Lights and Turn Signals. Log on today to see the whole collection of Martini’s Lights and start building your rolling light show.