Tag Archives: Can Am Spyder RT

Passenger Comfort Keeps Them Happy

A Touring Bike should afford the most comfort in the Motorcycling World one could imagine. From adjustable footrests, to larger seats, upgradable audio systems and hands free communication, and an often overlooked accessory – Passenger Armrests. No, they aren’t new, unless you own a Can Am Spyder. Add these to your Can Am and your passenger will have the utmost in luxury accommodations.

Spyder pass arm rests BBP-41-159    K and G Cycles  introduces an all new Passenger Armrest system for the Can-Am Spyder RT. These armrests mount underneath the rear of the seat to the frame, providing a very stable and secure anchor point. The positioning of the cast chrome swivel mounts on the side of the passenger seating area maintain a clean line. This also allows the chrome tubular support arms to pivot completely out of the passengers area for easy access to the seat. The armrests match the Smart Mount Backrest, Part # BBP-41-168, and work well together providing both Rider and Passenger with comfort and support.

    Keeping with the notion of increasing passenger comfort, a Honda Gold Wing is a comfortable Touring Machine as well, but there are ways to make it more comfortable for your passenger? K and G Cycles knows full well if your passenger isn’t happy than your ride can be pretty miserable. We want to make sure that doesn’t happen so that is why we carry Passenger Armrest Kits for the passenger on your Gold Wing.

GW pass armrest BBP-52-677A   Part # BBP-52-677A is a set of Armrests that fit 2001-2010 and 2012+ Honda Gold Wings. Covered in OEM matching fabric, these armrests conveniently swing out of the way so your passenger can access the rear seat with relative ease. Installation is simple as the armrests simply bolt to the passenger handles on each side and mount to the frame for a solid mount. For your peace of mind the installation of this kit does not affect Trunk and Saddlebag operation. They can be accessed without removing the armrests. The armrest pads have a 2-1/2″ thick soft foam pad for comfort. Coming in with a dimension of 7″L x 4-1/2″W it is clear to see why these armrests are the preferred choice when it comes to pampering your passenger.

   At K and G Cycles we strive to bring the the latest and greatest in motorcycle parts and accessories. Any time we can enhance the power of your bike or increase the comfort level we take pride in doing so. Adding passenger armrests to your Gold Wing can increase the shared miles and increase the overall enjoyment of owning a your motorcycle. Once you add the armrests, you can then install accessories such as storage pouches and even beverage holders.

Double Duty Can-Am Accessories

Can Am Spyder Owners rejoice! The list of accessories available for your ride keeps growing! Like you, we here at K and G Cycles get excited when new accessories become available for your rides. We have found 2 new pieces that provide protection and good looking that will make any Spyder the envy of the crowd.

cowl scuff bar BBP-41-160  First up for your consideration is the Lower Nose Cowl Wear bar. Designed to give your paint  protection and avoid gouges to the cowl, this beautifully Chromed Wear Bar has EPDM Rubber strips that attach to the accent cover. Installation is simple – Double sided tape and 4 screws. the 4 screws also keep the rubber strips in place to help prevent loss. For your added convenience this Wear Bar Kit comes with a replacement set of rubber strips. This accent piece will give your Spyder a whole new look. Some might even say it gives it a look similar to the nose of a World War II Fighter Plane. I almost wish I had a Spyder just so I could add this piece.

 BBP-41-170_1_Lampgard Can-Am RT  Are you looking for a way to protect those expensive headlights on your Can Am? Here is a new product by Lampgard designed to give you added protection for the front end of your RT. The LampGard line of headlight protectors has been saving expensive headlights from errant stones and debris since 1992. The most recent addition is a set of LampGard headlight protectors for the popular Can-Am RT. Each LampGard protector is molded to match the headlight shape and produced from extremely durable acrylic. Acrylic is a good impact resistant material which absorbs the impact from debris, unlike thin applied skins that apply to your headlight and havelittle impact absorption capability. LampGard truly protects by creating an air space between the LampGard and your headlight which becomes a void to help absorb any impact before it damages your headlight. Each LampGard is held in place by 4pair of round dual lock clear fasteners that have hi-temp adhesive to stay put on the headlight in all weather conditions. For the Can-Am RT 2010-14.

   Again, we feel the Spyder owners should not be left out of the Accessory Game. Count on K and G Cycles to deliver the best cutting edge products for your Can Am at unbelievable prices.

Your New Can Am Windshield

Well it looks like its happened again. More parts for your Can Am Spyder have hit the market. As we’ve said all along, K and G Cycles will keep you informed as parts become available for the beast. Well, here we are again. This time with a replacement windshield.

BBP-20-400 can am windshield     The ideal replacement windshield for the Can-Am Spyder RT has finally made it! After countless hours analyzing the riders air envelope, it was determined that a windshield that is 4 ½” wider than OEM unit, provided the rider with the best comfort zone. To decrease the known turbulence behind the windshield it was determined a design that incorporated unique anti-buffet vents to smooth out the turbulence and reduce noise. To ensure longevity this new windshield (P# BBP-20-400) is made from clear 5/32” DOT acrylic for strength and durability. This replacement windshield for Spyders is an affordable improvement over the OEM version.

  • Fits 2010 and later Can Am Spyder RT Models
  • 4 1/2″ Wider than stock
  • Made from DOT approved clear acrylic 5/32” thick acrylic
  • Features Anti-buffeting vents to reduce turbulence as well as noise
  • Improves rider comfort by reducing air pressures applied to the rider

We are excited to bring you more products for your Can Am and will continue to do so in the future as they become available. Some may be for Show, some may be for Go, some may increase rider comfort (like this replacement windshield P# BBP-20-400), and some may be for convenience. Whatever you are looking for your Spyder, if someone makes it you can guarantee K and G Cycles will have it at the lowest possible price.

 

Protect Your Spyder

Can Am Spyder Owners rejoice! There are more accessories available for your ride! Like you, we here at K and G Cycles get excited when new accessories become available for your rides. We have found 2 new pieces that provide protection and good looking that will make any Spyder the envy of the crowd.

cowl scuff bar BBP-41-160  First up for your consideration is the Lower Nose Cowl Wear bar. Designed to give your paint  protection and avoid gouges to the cowl, this beautifully Chromed Wear Bar has EPDM Rubber strips that attach to the accent cover. Installation is simple – Double sided tape and 4 screws. the 4 screws also keep the rubber strips in place to help prevent loss. For your added convenience this Wear Bar Kit comes with a replacement set of rubber strips. This accent piece will give your Spyder a whole new look. Some might even say it gives it a look similar to the nose of a World War II Fighter Plane. I almost wish I had a Spyder just so I could add this piece.

 BBP-41-170_1_Lampgard Can-Am RT  Are you looking for a way to protect those expensive headlights on your Can Am? Here is a new product by Lampgard designed to give you added protection for the front end of your RT. The LampGard line of headlight protectors has been saving expensive headlights from errant stones and debris since 1992. The most recent addition is a set of LampGard headlight protectors for the popular Can-Am RT. Each LampGard protector is molded to match the headlight shape and produced from extremely durable acrylic. Acrylic is a good impact resistant material which absorbs the impact from debris, unlike thin applied skins that apply to your headlight and have little impact absorption capability. LampGard truly protects by creating an air space between the LampGard and your headlight which becomes a void to help absorb any impact before it damages your headlight. Each LampGard is held in place by 4pair of round dual lock clear fasteners that have hi-temp adhesive to stay put on the headlight in all weather conditions. For the Can-Am RT 2010-14.

   Again, we feel the Spyder owners should not be left out of the Accessory Game. Count on K and G Cycles to deliver the best cutting edge products for your Can Am at unbelievable prices.

Making The Miles More Comfortable

A Touring Bike should afford the most comfort in the Motorcycling World one could imagine. From adjustable footrests, to larger seats, upgradable audio systems and hands free communication, and an often overlooked accessory – Passenger Armrests. No, they aren’t new, unless you own a Can Am Spyder. Add these to your Can Am and your passenger will have the utmost in luxury accommodations.

Spyder pass arm rests BBP-41-159    K and G Cycles  introduces an all new Passenger Armrest system for the Can-Am Spyder RT. These armrests mount underneath the rear of the seat to the frame, providing a very stable and secure anchor point. The positioning of the cast chrome swivel mounts on the side of the passenger seating area maintain a clean line. This also allows the chrome tubular support arms to pivot completely out of the passengers area for easy access to the seat. The armrests match the Smart Mount Backrest, Part # BBP-41-158, and work well together providing both Rider and Passenger with comfort and support.

    Keeping with the notion of increasing passenger comfort, a Honda Gold Wing is a comfortable Touring Machine as well, but there are ways to make it more comfortable for your passenger? K and G Cycles knows full well if your passenger isn’t happy than your ride can be pretty miserable. We want to make sure that doesn’t happen so that is why we carry Passenger Armrest Kits for the passenger on your Gold Wing.

GW pass armrest BBP-52-677A   Part # BBP-52-677A is a set of Armrests that fit 2001-2010 and 2012+ Honda Gold Wings. Covered in OEM matching fabric, these armrests conveniently swing out of the way so your passenger can access the rear seat with relative ease. Installation is simple as the armrests simply bolt to the passenger handles on each side and mount to the frame for a solid mount. For your peace of mind the installation of this kit does not affect Trunk and Saddlebag operation. They can be accessed without removing the armrests. The armrest pads have a 2-1/2″ thick soft foam pad for comfort. Coming in with a dimension of 7″L x 4-1/2″W it is clear to see why these armrests are the preferred choice when it comes to pampering your passenger.

   At K and G Cycles we strive to bring the the latest and greatest in motorcycle parts and accessories. Any time we can enhance the power of your bike or increase the comfort level we take pride in doing so. Adding passenger armrests to your Gold Wing can increase the shared miles and increase the overall enjoyment of owning a your motorcycle. Once you add the armrests, you can then install accessories such as storage pouches and even beverage holders.

Accessories for Your Spyder

Can Am Spyder Owners rejoice! There are more accessories available for your ride! Like you, we here at K and G Cycles get excited when new accessories become available for your rides. We have found 2 new pieces that provide protection and good looking that will make any Spyder the envy of the crowd.

cowl scuff bar BBP-41-160  First up for your consideration is the Lower Nose Cowl Wear bar. Designed to give your paint  protection and avoid gouges to the cowl, this beautifully Chromed Wear Bar has EPDM Rubber strips that attach to the accent cover. Installation is simple – Double sided tape and 4 screws. the 4 screws also keep the rubber strips in place to help prevent loss. For your added convenience this Wear Bar Kit comes with a replacement set of rubber strips. This accent piece will give your Spyder a whole new look. Some might even say it gives it a look similar to the nose of a World War II Fighter Plane. I almost wish I had a Spyder just so I could add this piece.

 BBP-41-170_1_Lampgard Can-Am RT  Are you looking for a way to protect those expensive headlights on your Can Am? Here is a new product by Lampgard designed to give you added protection for the front end of your RT. The LampGard line of headlight protectors has been saving expensive headlights from errant stones and debris since 1992. The most recent addition is a set of LampGard headlight protectors for the popular Can-Am RT. Each LampGard protector is molded to match the headlight shape and produced from extremely durable acrylic. Acrylic is a good impact resistant material which absorbs the impact from debris, unlike thin applied skins that apply to your headlight and havelittle impact absorption capability. LampGard truly protects by creating an air space between the LampGard and your headlight which becomes a void to help absorb any impact before it damages your headlight. Each LampGard is held in place by 4pair of round dual lock clear fasteners that have hi-temp adhesive to stay put on the headlight in all weather conditions. For the Can-Am RT 2010-14.

   Again, we feel the Spyder owners should not be left out of the Accessory Game. Count on K and G Cycles to deliver the best cutting edge products for your Can Am at unbelievable prices.

Must Have’s for Your Spyder

As you know, there aren’t many accessories out there for the Can Am Spyders, so when the buyers at K and G Cycles find accessories made for them, we do what we can to make them available to you. We recently learned 2 more items of value have come into production. A Deluxe GPS Mount and a Trunk Liner, both designed to make your travels easier.

can am gps mount LM-ED-RT   First up, we’ll highlight the GPS mount because just about everybody nowadays has ditched the map in favor of the GPS. They are everywhere – Cell Phones, Portable units, even handheld units.We feel the Can Am riders should not be left out of this movement, so we searched long and hard for the best GPS Mount and came up with this one from eCaddy. The eCaddy Deluxe (Part # LM-ED-RT) is a simple yet classy way to mount all kinds of GPS models on your Spyder. This unit will fit Can-Am Spyder RT & ST models. It mounts to the center handlebar area on the Can-Am Spyder RT and ST models placing the GPS right in front of the rider, but protected by the windscreen.

Here’s how to tell if this kit will work for you:

Some GPS models have the 4-hole “AMPS” pattern or diamond-shaped “RAM” pattern right on their backside, or on the back of the “cradle” (if one came with your GPS). (Note: You may need to remove the suction cup.)

Some units may require the purchase of a “cradle.”

In either case, all you need to mount it on a motorcycle is this kit!

BBP-HCFL can am trunk bag   Now that you are ready to hit the road with GPS assistance, you will want to pack for the trip. I know, you’re tired of trying to make all sorts of bags fit in the trunk and utilize the most space. Well those days are long gone! We’ve discovered a bag the was designed for Spyders and Spyders alone. The 1500 Front Trunk Liner by industry design leader Hopnel is a cost effective liner for the spacious front trunk on the Can Am Spyder. Chock full of must haves, The 1500 Front Trunk Liner (Part # BBP-HCFL) comes with a sturdy grab handle in addition to the 2 padded backpack straps to make removal and carry an easy task. The 1500 Front Trunk Liner measures a whopping 23” tall by 20 ½” wide by 13 ½” across, making it capable of holding enough gear for the long haul.

   When it comes to accessorizing your Can Am Spyder, K and G Cycles is your source for Aftermarket Accessories. We want you to enjoy your rides as much as possible whether it is increased comfort in the saddle, improved storage capability, or giving your navigator a seat so you can enjoy turn by turn directions.

Protect That Spyder for Less

We all know protecting our investments is as important as maintaining them and learning how to properly pilot them. Until now, there have been very few attempts at Day Covers or Half Covers as some call them. Ultragard, maker of high quality covers for almost any motorcycle, has introduced a half cover for your Can Am Spyder. K and G Cycles is proud to be your online source for these covers as well as other exciting accessories for your Spyder.

Can Am Day CoverUltragard set out to improv it’s half cover offering by designing an all new custom fitted half cover just for the Can-Am Spyder RT’s. This new cover is designed specifically for the Spyder RT/RTS/ and RT LTD to provide the best fit and finish available.
• Made from custom dyed water resistant polyurethane coated polyester, providing excellent protection against weather, dirt and pollution.
• Durable folded interlocking seams provide the best durability and weather resistance.
• SoftTek™ windshield liner to protect your windshield.
• Sewn in elastic hem with 4 elastic straps with hooks to help secure from blowing wind.
• Convenient compact draw string storage pouch.
• High visibility reflective logo to help your covered ride be seen in dark parking lots.
• Left and right antenna access points with hook and loop sealing.

So when you want to keep your Can Am protected from the world, you need a cover from Ultragard. These covers are easy to install, are extremely affordable, and offer a huge amount of protection for your ride. Contact the Pros at K and G Cycles and order yours today.

ULTRAGARD HALF COVER, Black, Fits Can Am Spyder RT 2010-, RT/RTS/RT Limited

Add Comfort for Increased Miles

A Touring Bike should afford the most comfort in the Motorcycling World one could imagine. From adjustable footrests, to larger seats, upgradable audio systems and hands free communication, and an often overlooked accessory – Passenger Armrests. No, they aren’t new, unless you own a Can Am Spyder. Add these to your Can Am and your passenger will have the utmost in luxury accommodations.

Spyder pass arm rests BBP-41-159    K and G Cycles  introduces an all new Passenger Armrest system for the Can-Am Spyder RT. These armrests mount underneath the rear of the seat to the frame, providing a very stable and secure anchor point. The positioning of the cast chrome swivel mounts on the side of the passenger seating area maintain a clean line. This also allows the chrome tubular support arms to pivot completely out of the passengers area for easy access to the seat. The armrests match the Smart Mount Backrest, Part # BBP-41-158, and work well together providing both Rider and Passenger with comfort and support.

    Keeping with the notion of increasing passenger comfort, a Honda Gold Wing is a comfortable Touring Machine as well, but there are ways to make it more comfortable for your passenger? K and G Cycles knows full well if your passenger isn’t happy than your ride can be pretty miserable. We want to make sure that doesn’t happen so that is why we carry Passenger Armrest Kits for the passenger on your Gold Wing.

GW pass armrest BBP-52-677A   Part # BBP-52-677A is a set of Armrests that fit 2001-2010 and 2012+ Honda Gold Wings. Covered in OEM matching fabric, these armrests conveniently swing out of the way so your passenger can access the rear seat with relative ease. Installation is simple as the armrests simply bolt to the passenger handles on each side and mount to the frame for a solid mount. For your peace of mind the installation of this kit does not affect Trunk and Saddlebag operation. They can be accessed without removing the armrests. The armrest pads have a 2-1/2″ thick soft foam pad for comfort. Coming in with a dimension of 7″L x 4-1/2″W it is clear to see why these armrests are the preferred choice when it comes to pampering your passenger.

   At K and G Cycles we strive to bring the the latest and greatest in motorcycle parts and accessories. Any time we can enhance the power of your bike or increase the comfort level we take pride in doing so. Adding passenger armrests to your Gold Wing can increase the shared miles and increase the overall enjoyment of owning a your motorcycle. Once you add the armrests, you can then install accessories such as storage pouches and even beverage holders.

Stylish Protection for your Can Am

Can Am Spyder Owners rejoice! There are more accessories available for your ride! Like you, we here at K and G Cycles get excited when new accessories become available for your rides. We have found 2 new pieces that provide protection and good looking that will make any Spyder the envy of the crowd.

cowl scuff bar BBP-41-160  First up for your consideration is the Lower Nose Cowl Wear bar. Designed to give your paint  protection and avoid gouges to the cowl, this beautifully Chromed Wear Bar has EPDM Rubber strips that attach to the accent cover. Installation is simple – Double sided tape and 4 screws. the 4 screws also keep the rubber strips in place to help prevent loss. For your added convenience this Wear Bar Kit comes with a replacement set of rubber strips. This accent piece will give your Spyder a whole new look. Some might even say it gives it a look similar to the nose of a World War II Fighter Plane. I almost wish I had a Spyder just so I could add this piece.

 BBP-41-170_1_Lampgard Can-Am RT  Are you looking for a way to protect those expensive headlights on your Can Am? Here is a new product by Lampgard designed to give you added protection for the front end of your RT. The LampGard line of headlight protectors has been saving expensive headlights from errant stones and debris since 1992. The most recent addition is a set of LampGard headlight protectors for the popular Can-Am RT. Each LampGard protector is molded to match the headlight shape and produced from extremely durable acrylic. Acrylic is a good impact resistant material which absorbs the impact from debris, unlike thin applied skins that apply to your headlight and havelittle impact absorption capability. LampGard truly protects by creating an air space between the LampGard and your headlight which becomes a void to help absorb any impact before it damages your headlight. Each LampGard is held in place by 4pair of round dual lock clear fasteners that have hi-temp adhesive to stay put on the headlight in all weather conditions. For the Can-Am RT 2010-14.

   Again, we feel the Spyder owners should not be left out of the Accessory Game. Count on K and G Cycles to deliver the best cutting edge products for your Can Am at unbelievable prices.